Side Opening Elevator Door Operator PM Motor 700mm - 1800mm

Elevator Side Opening Door Operator With High Efficiency And Energy Saving

Side Opening Door Operator: Precision Access Control for Vertical Transportation

The side opening door operator is an electromechanical system designed to automate the smooth and reliable operation of elevator car and landing doors in a horizontal sliding motion. As a critical safety component in modern elevator systems, it ensures secure passenger entry/exit while optimizing traffic flow efficiency.

Technical Features:

• Synchronous belt or gear-driven mechanisms with 0.01-0.8 m/s adjustable speed profiles

• Dual-channel safety sensors (light curtains and mechanical safety edges) with <4N detection force

• Self-learning control boards that automatically calibrate door weight (up to 150kg) and travel distance

• Low-noise operation (<55 dB) through polyurethane damping elements

Advanced Capabilities:

• Fire-rated models maintain functionality for 90+ minutes at 300°C (EN81-58 compliant)

• IoT-enabled versions with real-time monitoring of 10+ parameters including motor current (±5% accuracy)

• Energy-saving modes reducing standby power consumption by 70%

These systems support various door configurations (single-slide, center-opening, or telescopic) with <2mm repeat positioning accuracy. Modern operators integrate with building management systems, featuring:

• Predictive maintenance alerts for worn belts or misalignment

• Emergency power operation (3+ full cycles during outages)

• Anti-nuisance algorithms preventing unnecessary door movements

PRODUCT FEATURES

1. Using PM motor, large rotary torque, high efficiency and energy saving
2. Using motor synchronous with direct drag mode to transfer torque, more compact design
3. Highly smooth operation, achieve the completely closed loop control of the torque, speed and position
4. Using non-connecting rod asyn.door clutch, optional car door lock, easy to adjust
5. Total door panel weight≤200kg; voltage: 200-250 V,50/60 Hz.

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.

Side Opening Elevator Door Operator 700mm

PM Motor Sliding Door Operator

AC220V Elevator Door Operator

Side Opening Elevator Door Operator PM Motor 700mm - 1800mm Images